ID 390015 - Fraction sampling method for curves to array is unsymmetrical.

Problem summary
Fraction sampling method for curves to array is unsymmetrical.

Customer reported version
modo.13.0v1

Customer reported platform
10.14

Steps to reproduce

1) Open Modo and navigate to the Setup layout.

​

2) In the Schematic viewport at the bottom create a new Mesh, to do this select Add...>Mesh Operations/Other>Mesh.

3) Select the new mesh Mesh, then select Add...>Mesh Operations/Create/Curves>Circle. ​

4) Now select Add...>Channel Modifiers/Array>Curves to Array and drag the Mesh node pipe to Curves to Array. The Schematic viewport should now look like this.

​

5) With the Curves to Array node selected navigate to the Properties tab. Set the Steps to 2 and the Sampling Method to Fraction.​

6) Make sure the grid is visible and your view is set to Front.

​

7) If you check the viewport and zoom in a long way on points 0 and 1 you will see they're not symmetrical.

​

​​​

Expected behaviour
For both points 0 and 1 to be symmetrical.

Actual behaviour
The points aren't symmetrical on the grid 

Workaround
Unknown. 

Reproduced by support

This bug has been reproduced in:
Modo 13.0v1 - Windows 10 - Centos 7 - MacOS 10.13

Earliest version tested
Modo 13.0v1 - This feature did not exist before this version