ID 512961 - Vertex/face selection in the 3D viewport gets less accurate the further away from the origin you get, and eventually stops working

Problem summary
Vertex/face selection in the 3D viewport gets less accurate the further away from the origin you get, and eventually stops working
 
Customer reported version
nuke.13.2v2
 
Customer reported platform
Windows 10
 
Steps to reproduce
 
1) Open Nuke

2) Paste the below Card node:

Card2 { rows 3 columns 3 translate {0 0 600000} scaling {1000 1000 1000} control_points {3 3 3 6 1 {-0.5 -0.5 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0.1666666865 0} 0 {0 0 0} 0 {0 0 0} 1 {0 -0.5 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0.1666666865 0} 0 {0 0 0} 0 {0.5 0 0} 1 {0.5 -0.5 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0.1666666865 0} 0 {0 0 0} 0 {1 0 0} 1 {-0.5 0 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0.1666666716 0} 0 {0 -0.1666666716 0} 0 {0 0.5 0} 1 {0 0 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0.1666666716 0} 0 {0 -0.1666666716 0} 0 {0.5 0.5 0} 1 {0.5 0 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0.1666666716 0} 0 {0 -0.1666666716 0} 0 {1 0.5 0} 1 {-0.5 0.5 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0 0} 0 {0 -0.1666666865 0} 0 {0 1 0} 1 {0 0.5 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0 0} 0 {0 -0.1666666865 0} 0 {0.5 1 0} 1 {0.5 0.5 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0 0} 0 {0 -0.1666666865 0} 0 {1 1 0} } name Card1 selected true xpos -44 ypos -138}

 
3) Press F to fit it in the Viewport, and enable Vertex selection mode in the 3D viewport
 
4) Try to select all the vertices, depending on the camera angle, only some vertices will get selected:
 

 
The further away in z the Card is, the wrose this gets
 
Expected behaviour
For all the vertices to be selected
 
Actual behaviour
Only some vertices are selected, depending on camera angle
 
Workaround
If you Disable occlusion testing in the 3D Viewport, then selection seems much more stable
 
Reproduced by support
This bug has been reproduced in:
Nuke 13.2v2 - Windows 10, CentOS 7, macOS Monterrey
Nuke 9.0v1 - WIndows 10, CentOS 7
 
Earliest version tested
Nuke 9.0v1 - This issue appears to be in all tested versions of the product