ID 513774 - Measurements are not recognizing compound values and causing incorrect output.

Problem summary
Measurements are not recognizing compound values and causing incorrect output.
 
Customer reported version
modo.16.0v2
 
Customer reported platform
mac.12
 
Steps to reproduce
 
1) Launch Modo.

2) Select the Camera in the Item List

3) Go to Properties.
 
4) By default units should be set to SI so the measures for position will be set to m or mm.
 
5) Select either x, y, or z position.
 
6) Enter 6ft 7in.
 
7) The position number will set to only 6 and not accept the additional 7in value.
 
8) In the last working version the measure should convert to the correct measurement in meters.
 
 
 
Expected behaviour
The compound value of feet and inches should be accepted and calculated.
 
Actual behaviour
Only the first number is entered and the measurement unit is not recognized.
 
Workaround
You can enter compound values using ' " notations. For example, 6'7".
 
Reproduced by support
 
This bug has been reproduced in:
16.0v2 - Windows 10 / Mac OS 12.4
16.0v1 - Windows 10 / Mac OS 12.4 - Regression
 
Unable to reproduce bug in:
15.2v4 - Windows 10 / Mac OS 12.4
 
Earliest version tested

15.2v4 - This issue doesn't appear in this version and has regressed