ID 537393 - Linear Falloff - Incorrect symmetric initial position

Problem summary
The start and end positions of the linear falloff are set in reverse.

Customer reported version
Modo 16.1v1

Customer reported platform
Windows 11

Steps to reproduce

1) Open Modo and create a plane, then select it and navigate to Geometry > Polygons > Subdivide... and select and subdivide three or more times.

2) Enable Edge Selection and select an edge loop, select the 'Falloff' button and change the setting to Linear, then enable the Move tool.

3) Under the 'Falloff' settings under the 'Auto Size' tab, set the Symmetric option to 'End' and press the Auto Size button direction corresponding to your Edge Loop, X for this example.

4) Alter the Edge Loop by moving the Move tool up or down, then disable the Move tool.

5) Select another Edge Loop, reenable the Move tool and observe the Falloff indicator.

Expected behavior
The Auto Size should be set to the selected Falloff axis for successive uses.

Actual behavior
The Auto Size does not retain the selected Falloff axis on next selection.

Workaround
The work around for this issue is to set the Auto Size each time.

Reproduced by Support in:
Modo 16.1v1 - Windows 11, macOS 12.3 Monterey - regression

Unable to reproduce bug in:
Modo 16.0v4 - Windows 11, macOS 12.3 Monterey

Earliest version tested
Modo 16.0v4 - This issue doesn't appear in this version and has regressed.