ID 538691 - Unexpected results when using a custom Profile with the Bridge tool

Problem summary
Unexpected results when using a custom Profile with the Bridge tool.
 
Customer reported version
Modo16.1v1
 
Customer reported platform
Windows 11
 
Steps to reproduce
1) Download the attached .lxo and .lxl files, then open the .lxo file in Modo.
2) Select the mesh, then enable Polygon Selection and select two polygons horizontal to each other on the selected mesh.
3)Navigate to The Duplicate tab under the Model toolbar and press the Bridge button.
4) Under the Bridge options, ensure the 'Remove Polygons' and 'Reverse Direction' are enabled.
5) Scroll down the Bridge options and under Profiles, select the 'Profiles' drop-down menu, select the add path option, and select the location that the downloaded .lxl file was saved to.
6) select the custom curve that appears in the asset box below the drop-down menu, enable 'Reverse Insert' and 'Keep Aspect', then hit apply and observe the results in the 3D Viewport.

 
Expected behavior
The Bridge tool should follow the selected Profile curve when it is applied to the mesh.

 
Actual behavior
The Bridge tool does not follow the selected Profile curve as expected when it is applied to the mesh.

 
Workaround
Unknown.
 
Reproduced by Support in:
Modo 16.1v2 - Windows 11, macOS 12.6 Monterey 
Modo 16.1v1 - Windows, macOS 12.6 Monterey - regression
 
Unable to reproduce bug in:
Modo 16.0v4 - Windows 11, macOS 12.6 Monterey
 
Earliest version tested
Modo 16.0v4 - This issue doesn't appear in this version and has regressed.