Problem summary
Pixel Probe doesn't update on AOV change
Customer reported version
Katana 6.5v5
Customer reported platform
CentOS7
Steps to reproduce
1) In Katana, open the AOV example project by selecting Help > Example Projects > Settiing up AOVS > Open for 3Delight.
2) Right-click the Render node at the bottom, select Preview Render and wait for the render to finish fully.
3) In the top of the Monitor tab toolbar, select the pipette icon to enable the Pixel Probe, CTRL + click on your rendered frame to set the probe to a pixel.
4) At the bottom of the Monitor tab, select the dropdown labeled 'default' and change it to any other AOV (reflection is the highest contrast).
5) Observe the unchanged pixel data at the top toolbar, that is only updated after causing a recalculation (moving the probe, expanding the pipette, etc.)
Expected behaviour
The Pixel Probe should update the pixel data after the AOV is changed.
Actual behaviour
The Pixel Probe does not update upon an AOV change and displays the previous pixels data.
Workaround
The easiest way found to recalculate the pixel data without moving the probe is expanding and collapsing the pipette. (+ / - sign next to the probes intersection)
Reproduced by Support:
This bug has been reproduced in:
Katana 8.0v1 - Windows 11 / Rocky 9
Katana 7.5v1 - Windows 11
Katana 7.0v5 - Windows 11
Katana 6.5v5 - Windows 11 / CentOS 7
Katana 6.0v5 - Windows 11
Katana 5.0v7 - Windows 11
Katana 5.0v1 - Windows 11
Katana 4.5v7 - Windows 11
Katana 4.5v1 - Windows 11
Katana 4.0v8 - Windows 11
Earliest version tested
Katana 4.0v8 - This issue appears to be in all tested version of the product.